Device library – THATec Innovation

thaTEC:OS – Device library

Your device is missing?
>> Send us a request for your device! <<

Manufacturer	Device name	Device type
ASI	MS2000	Positioning system
Name of module in thaTEC:Core: ASI-MS2000 The current version of this module allows for the control of the following functions: Up to 3 axes Enable/disable single axis Home axes Read current position Move absolute Set current position as zero Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample) Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements)
Agilent	DSO-X	Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope The current version of this module allows for the control of the following functions: Activate channels Read out traces from activated channels Continuous readout
Agilent	E8257D	Pulse generator
Name of module in thaTEC:Core: Agilent_E8257D
Agilent	N5230C	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Agilent_N5230C_VNA The current version of this module allows for the control of the following functions: Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Ametek	7265 Dual phase DSP lock-in	Lock-in amplifier
Name of module in thaTEC:Core: Ametek_7265_1
Anritsu	MG3692C	RF source
Name of module in thaTEC:Core: Anritsu_MG3692C The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Set trigger source/trigger type/trigger edge type/clock rate Enable pulse modulation Set pulse delay/width/period/frequency/polarity
Anritsu	MS4647B	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Anritsu_MS4647B_VNA The current version of this module allows for the control of the following functions: Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Any	Universal camera module (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera Remarks: NI Vision license required! The current version of this module allows for the control of the following functions: Calibrate Measure distances Zoom Export live image Set framerate Set gain Set exposure time
Berkeley Nucleonics	845	RF source
Name of module in thaTEC:Core: BNC845 The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Enable/Disable modulation Set modulation type/source Set pulse period/width/polarity Set amplitude modulation frequency/depth/waveform
Berkeley Nucleonics	S1365	Signal analyzer
Name of module in thaTEC:Core: BNC_spectrumanalyzer
Cobolt	05-01 Series	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	04-01 Series	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Zouk	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Twist	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Calypso	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Fandango	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Samba	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Jive	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Bolero	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Flamenco	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Cobolt	Rumba	Laser
Name of module in thaTEC:Core: Cobolt_lasers Remarks: Switching lasers on/off is disabled since the Cobolt firmware always requires a switching of the key switch before turning the laser on The current version of this module allows for the control of the following functions: Set laser power (will switch laser into constant power mode) Set drive current (will switch laser into constant current mode) Read out current laser power/drive current Display device status (power on/laser on/laser lock/interlock status/key switch status/ error status) Display device info (serial number/operating hours/faults)
Coherent	Sapphire	Laser
Name of module in thaTEC:Core: Coherent_Sapphire
FAST ComTec	MCS6A (USB version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5	Timeresolution
Name of module in thaTEC:Core: MCS6A
FAST ComTec	P7887 (PCI version) time digitizer for time-resolved Brillouin light scattering with thaTEC:TFPDAS5	Timeresolution
Name of module in thaTEC:Core: P7887
FLIR	BlackFly (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera
FLIR	Chameleon (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera
FLIR	Flea (NI Vision license required)	Camera
Name of module in thaTEC:Core: camera
Hamamatsu	ImagEM X2	Detector
Name of module in thaTEC:Core: Hamamatsu_Image_EM_X2 The current version of this module allows for the control of the following functions: Set gain Set exposure time Set readout speed Set readout direction Capture and display image Set crop area via cursors in the image Display device info (model/temperature)
Hamamatsu	ORCA series	Detector
Name of module in thaTEC:Core: Hamamatsu-ORCA The current version of this module allows for the control of the following functions: Set exposure time Set readout speed Set readout direction Capture and display image Set crop area via cursors in the image Display device info (model/temperature)
Keithley	2000	Multimeter
Name of module in thaTEC:Core: Keithley_2000
Keithley	2182A Nanovoltmeter	Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Keithley	22xx series	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley	2220	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley	2230	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley	2231	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Keithley	2400 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Keithley	2614B	Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B The current version of this module allows for the control of the following functions: Enable/disable outputs Switch mode for each output Set current/voltage for each output Set current range/voltage limmit for each channel Set maximum/minimum current for each channel Read resistance for each output Plot resistance over time Export time-resistance plots
Keithley	6200 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Keithley	6221	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Kepco	BOP series (via GPIB)	Power supply
Name of module in thaTEC:Core: Kepco_GPIB Remarks: Only for power supplies with GPIB connection! The current version of this module allows for the control of the following functions: Set output current Switch output on/off Set maximum/minimum current (to protect your equipment) Set current ramping step and time per step (to prevent too fast current changes) Set voltage protection level
Kepco	BOP 100W (via GPIB)	Power supply
Name of module in thaTEC:Core: Kepco_GPIB Remarks: Only for power supplies with GPIB connection! The current version of this module allows for the control of the following functions: Set output current Switch output on/off Set maximum/minimum current (to protect your equipment) Set current ramping step and time per step (to prevent too fast current changes) Set voltage protection level
Kepco	BOP 200W (via GPIB)	Power supply
Name of module in thaTEC:Core: Kepco_GPIB Remarks: Only for power supplies with GPIB connection! The current version of this module allows for the control of the following functions: Set output current Switch output on/off Set maximum/minimum current (to protect your equipment) Set current ramping step and time per step (to prevent too fast current changes) Set voltage protection level
Kepco	BOP 400W (via GPIB)	Power supply
Name of module in thaTEC:Core: Kepco_GPIB Remarks: Only for power supplies with GPIB connection! The current version of this module allows for the control of the following functions: Set output current Switch output on/off Set maximum/minimum current (to protect your equipment) Set current ramping step and time per step (to prevent too fast current changes) Set voltage protection level
Kepco	BOP series (via analog voltage from Newport XPS controller)	Power supply
Name of module in thaTEC:Core: Kepco_via_XPS
Keysight	33621A waveform generator	Pulse generator
Name of module in thaTEC:Core: Keysight_33621A
Keysight	DSO-X	Oscilloscope
Name of module in thaTEC:Core: Agilent_DSO-X_Oscilloscope The current version of this module allows for the control of the following functions: Activate channels Read out traces from activated channels Continuous readout
Keysight	N5225A	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: N5225A_VNA The current version of this module allows for the control of the following functions: Select trace Set sweep points Set start/stop frequency Set RF power Switch output on/off Set averages Take reference Display current trace (raw data or corrected using reference) Continuous readout
Keysight	N5230C	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: Agilent_N5230C_VNA The current version of this module allows for the control of the following functions: Set start/stop frequency Set number of points Set averages Set output power Switch output on/off Activate traces Take reference Display raw/corrected data (using reference data) Continuous readout Unleveled indicator
Keysight	N9010A spectrum analyzer	Signal analyzer
Name of module in thaTEC:Core: Keysight_N9010A The current version of this module allows for the control of the following functions: Set center frequency Set frequency span Set measurement type Display traces Set trace type/trace name/detector type Set average mode and number Set number of sweep points Set input impedance Set amplitude units Set bandwidth Set attenuation and reference level
Kymera	193i	Detector
Name of module in thaTEC:Core: Kymera_193i
LakeShore	648	Gaussmeter
Name of module in thaTEC:Core: LakeShore_648
LakeShore	LS455	Gaussmeter
Name of module in thaTEC:Core: LakeShore_455 The current version of this module allows for the control of the following functions: Read out field value Set field units Set field range Set number of samples Set offset/multiplier Automatic readout Display field value vs. time
LakeShore	LS475	Gaussmeter
Name of module in thaTEC:Core: LakeShore_475
LakeShore	LS475 including field control for magnet power supply	Gaussmeter
Name of module in thaTEC:Core: LakeShore_475_field_control Remarks: This version includes the field control of an electromagnet via the GPIO connections of the LakeShore 475 module The current version of this module allows for the control of the following functions: Read field value Read temperature Continuous readout Set target field Set field shift
MadCityLabs	Piezo controller	Positioning system
Name of module in thaTEC:Core: MadCityLabs The current version of this module allows for the control of the following functions: Up to 3 axes Read current positions Set velocity Read current action status Move to absolute position Move relative using arrow keys on keyboard
Marzhauser	Tango series	Positioning system
Name of module in thaTEC:Core: Marzhauser_Tango The current version of this module allows for the control of the following functions: Up to 3 axes Enable/disable single axis Home axes Read current position Move absolute Set current position as zero Move relative to zero position (e.g. for identical 2D scans at multiple positions on the sample) Enable/disable waiting for stage to reach target position (e.g. for very fast automated measurements) Calibrate stage
Measurement computing	USB-3100 series	DAQ hardware
Name of module in thaTEC:Core: MC_USB3101_PowerSupply
Measurement computing	3100	DAQ hardware
Name of module in thaTEC:Core: MC_USB3101_PowerSupply
Measurement computing	3101	DAQ hardware
Name of module in thaTEC:Core: MC_USB3101_PowerSupply
National Instruments	NI9402 module for photon counter	DAQ hardware
Name of module in thaTEC:Core: NI_9402_PhotonCounter
Newport	ESP301 series	Positioning system
Name of module in thaTEC:Core: Newport_ESP301 The current version of this module allows for the control of the following functions: Move to absolute position Set axis velocity Readout current position
Newport	SMC100 DC or stepper motor controller	Positioning system
Name of module in thaTEC:Core: SMC100_Rotator The current version of this module allows for the control of the following functions: Rotate to absolute angle Relative rotation Readout current angle Home stage
Newport	XPS-D controller	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	XPS-Q controller	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	XM series linear stages	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	XMS series linear stages	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	XML series linear stages	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	GTS series vertical stage	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Newport	M-VP-5ZA	Positioning system
Name of module in thaTEC:Core: XPS_controller The current version of this module allows for the control of the following functions: Select group Assign positioners to the axes of a group Display current stage status Initialize/home axes Move to absolute position Set axis velocity
Ocean Optics	QE Pro	Spectrometer
Name of module in thaTEC:Core: OceanOptics_QEPro The current version of this module allows for the control of the following functions: Set integration time Set averages Read and display spectrum Display device info (serial number)
Physikinstrumente (PI)	E710 piezo controller	Positioning system
Name of module in thaTEC:Core: PI_E710 The current version of this module allows for the control of the following functions: Move to absolute position Readout travel ranges
Picotech	PicoSource	Pulse generator
Name of module in thaTEC:Core: PicoSource
Picotech	PicoVNA	Vector Network Analyzer (VNA)
Name of module in thaTEC:Core: PicoVNA
Picotech	Picoscope 9300 series USB oscilloscope	Oscilloscope
Name of module in thaTEC:Core: PicoScope9300
Rohde & Schwarz	SMB100A	RF source
Name of module in thaTEC:Core: Rohde-Schwarz-SMB100A The current version of this module allows for the control of the following functions: Set RF frequency Set RF power Switch output on/off Set maximum RF power (to protect your device) Sweep frequency using arrow keys (to find working point)
SpinCore	PulseBlaster USB version	Pulse generator
Name of module in thaTEC:Core: SpinCore_PulseBlaster
Stanford Reasearch Systems (SRS)	DG645 delay generator	Pulse generator
Name of module in thaTEC:Core: SR_DG645 The current version of this module allows for the control of the following functions: Enable/Disable AB output Set delay time Set pulse duration Set level Set level offset Set polarity Set trigger source Set trigger rate Set trigger level Enable/disable burst mode Set burst configuration (burst count/burst period/burst delay)
Stanford Reasearch Systems (SRS)	SR830	Lock-in amplifier
Name of module in thaTEC:Core: SR_830_1
Swabian Instruments	532nm pulsed laser	Laser
Name of module in thaTEC:Core: SI_laser_532
Swabian Instruments	633nm pulsed laser	Laser
Name of module in thaTEC:Core: SI_laser_633
Swabian Instruments	Pulse Streamer	Pulse generator
Name of module in thaTEC:Core: PulseStreamer
Swabian Instruments	Time Tagger (TR-BLS)	Timeresolution
Name of module in thaTEC:Core: TimeTagger Remarks: Only for Time Tagger with firmware version 2.4.X. For newer firmware, please use a dfferent module! Requires thaTEC:TFPDAS for time-resolved Brillouin light scattering measurements.
Swabian Instruments	Time Tagger (TR-BLS)	Timeresolution
Name of module in thaTEC:Core: TimeTagger_2.6.2 Remarks: For Time Tagger with firmware version 2.6.2 and newer. Requires thaTEC:TFPDAS for time-resolved Brillouin light scattering measurements.
Swabian Instruments	Time Tagger module for countrates	Timeresolution
Name of module in thaTEC:Core: TimeTagger_counter Remarks: Only for Time Tagger with firmware 2.4.X
TableStable	TFP-1	Signal analyzer
Name of module in thaTEC:Core: TFPDAS
TableStable	TFP-2	Signal analyzer
Name of module in thaTEC:Core: TFPDAS
TableStable	Tandem Fabry-Perot interferometer	Signal analyzer
Name of module in thaTEC:Core: TFPDAS
Tektronix	2000	Multimeter
Name of module in thaTEC:Core: Keithley_2000
Tektronix	2182A Nanovoltmeter	Multimeter
Name of module in thaTEC:Core: Keithley_2182A
Tektronix	22xx series	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix	2220	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix	2230	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix	2231	Power supply
Name of module in thaTEC:Core: 2230G_powersupply
Tektronix	2400 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_2400
Tektronix	2614B	Sourcemeter
Name of module in thaTEC:Core: Keithley_2614B The current version of this module allows for the control of the following functions: Enable/disable outputs Switch mode for each output Set current/voltage for each output Set current range/voltage limmit for each channel Set maximum/minimum current for each channel Read resistance for each output Plot resistance over time Export time-resistance plots
Tektronix	6200 series	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Tektronix	6221	Sourcemeter
Name of module in thaTEC:Core: Keithley_6221
Thorlabs	Camera	Camera
Name of module in thaTEC:Core: ThorlabsCam The current version of this module allows for the control of the following functions: Display camera image
Thorlabs	Kinesis software module	Positioning system
Name of module in thaTEC:Core: Thorlabs_Kinesis Remarks: Available functions depend on the connected device.
Toptica	iBeam smart series	Laser
Name of module in thaTEC:Core: Toptica_iBeam_smart The current version of this module allows for the control of the following functions: Set laser power Switch laser on/off Read laser power Read drive current Read laser status (power on laser on channel 1 on)

Your device is missing?
>> Send us a request for your device! <<